Posts by Shpongle

Here we go again.

Quote:Originally Posted by saophen That's really nothing lol. I'm not worried about a few degrees change. Thanks for your input. I guess I don't really need the expensive pump I want to get? I'm just afraid man my parts were really...

Just finished some prime95 runs, and the results are interesting. Relevant data about the loop: MCP35X w/ EK DDC X-Top, XSPC Raystorm on a 2500k @ 5.0GHz @ 1.448V, EVGA Hydrocopper on a GTX 680 @ idle, Alphacool UT60 360mm, GT AP-15's...

Quote:Originally Posted by saophen Or is that too expensive? Having a good pump with high water flow= lower temps right? Everything looks good to me. I haven't read much in to flow rates vs. max temperatures. I'll actually run a...

Quote:Originally Posted by Von Leon I have one more question. Do you guys think a Clear Reservoir with green coolant or a venom green painted Reservoir would look better? Thanks, Von Leon Perhaps a green coolant + some kind of...

Quote:Originally Posted by saophen This waterblock fits our graphics card?...

Quote:Originally Posted by Beat1188  So there is no point in boycotting Metro over a game mode that only 1% of the player base is going to play The point of boycotting it is principle. By buying this game you have shown all parties...

I had something similar come out of my Alphacool UT60 360mm. I'm pretty sure it was copper since it had oxidized green (let me know if that's not the correct terminology). I didn't get a picture but it was approximately one inch long. My...

Adding an extra reservoir will just increase the time needed for your water temp to reach an equilibrium. Other than aesthetic reasons there isn't much need for a secondary reservoir in a loop.

Well, it mentions that if sold without the pump, you can add a MCP350, 355, 35B, or 35X later. I'd imagine that you can remove the pump that comes with it. Hopefully someone with experience with this radiator sees this thread and chimes...