Posts by liquidzoo

Quote:Originally Posted by Tjj226 Angel Yeah I am not surprised. You say the negative terminal came out. You don't have pics, so I googled DT770 driver and this is what I get http://cdn.head-fi.org/a/a3/a3cd6a14_dtdriver2.jpg is...

Need some help. Rather than retyping everything, please see this. Still pissed...

Pretty sure my issues are coming from not twisting the wires together and just jamming them in there along with the battery for the LED. If I were to do it again, I'd make the LED run off of the 5v line on a sacrificed USB cable both to...

If you're confident in your wiring abilities, it's not that hard to make a switch box with a 3pdt switch and a few panel mount jacks (or non, but then where do you put the switch ). That way you can completely cut the unused source out...

Sennheiser makes some wireless headphones for 90, but even then you'd get much better quality sound out of wired headphones and a separate mic.

The DT990, like most of the DT series, come in 2 flavors: Professional and Premium. Not sure why, but the Premium is much more expensive (and imo much better looking). Amazon has the Pro in 250 Ohm and the Premium in both 32 and 250...

For portable and under $50 you're probably looking at the Fiio E6 (not entirely recommended), Fiio E11 (if you can scrounge up another $10+shipping), or a DIY option like a CMOY.

I think that's going to depend greatly on how much space you have and what kind of sound you want. For boomy bass, bigger subs are usually better, where smaller ones generally give more controlled sound. What kind of car? And are you...

I believe the receiver is doing all of the processing of the digital signal. A sound card may help, but with a purely digital signal I'm a little skeptical.

I've never tried the DT880s (or the Q701s for that matter). The only open headphone I have is the Grado SR225i, and if they leak as much as my Grados do the answer is: a lot.