New Posts  All Forums:

Posts by Akatsuki No Tobi

My Asus G51VX battery is no longer working, and I'm ready to upgrade to a new gaming laptop that can also still be used for my 2nd semester of college. I customized the Sager NP8150 with an i7-2760QM, and a HD 6990 at 8GB of memory all...
I bought a supposedly new C300 128GB from Ebay and installed it into my rig. The C300 looked like it was an OEM because it didn't come in a fancy new box or anything. Ever since then, my read speed has always been capped at Sata II...
My 128GB starts off with 119GB even without Windows installed. I'm guessing all drives automatically lose space from the start.
Quote:Originally Posted by bespreDELL;13633819 ok. let's thinkg about it again. To have your SSD work at 100% speed at 6GB Sata3 You need: 1. Sata3 port 2. SSD that supports Sata3 3.Windows with ahci drivers. If you have...
I have the same board and on CPUID Hardware Monitor, TMPIN 1 sometimes goes up to 120 C. But everything still runs stable.
Quote:Originally Posted by bespreDELL;13616892 SATA Interface AHCI ? Did that already.
Quote:Originally Posted by 7ranslucen7;13612433 Sounds like a driver issue if it detects it as only sata 3 on the sata 6 port. Did you try the ssd formated on both sata 3 ports? I had this issue with my c300 but it was fine after i...
I'm looking at the Intel Rapid Storage program and it says SATA transfer rate is at 3gb/s. I just have to know how to unleash the full 6gb/s. Any ideas?
And I don't think the C300 itself is the problem because it caps out at the max of Sata II speeds. I would imagine a faulty C300 to be much lower or something. Performance is buttery smooth since this is the first time I've ever used an...
I did that too.
New Posts  All Forums: