Posts by bvazx

Software - Enotus Mouse Test 0.1.4; Mousepad - QcK Heavy; DPI - 800; Polling speed - 1000 Hz; For F/W 102 Max speed - ~2.6-2.8 m/s; For F/W 61 Max speed - ~4.2-4.4 m/s. CMGuys, can you do F/W without any issues with max speed like in...

Unbelievable! Download the newest firmware for Spawn here!! Quick test F/W 102: Software - Enotus Mouse Test 0.1.4; Mousepad - QcK Heavy; DPI - 800; Polling speed - 1000 Hz; Max speed - ~2.6-2.8 m/s (several times); For F/W 61 with...

Quote:Originally Posted by CMRajiv We shut down this forum because the people moderating it no longer are with the company or were internally relocated. We shut it down because it became a haven for spam bots and empty requests. If...

Makav3li, never use this forum. It's sucks...

We need profiles in the Spawn's software!

CMS Spawn and Logi G400 are the greatest mice. Razer is not...

For Logitech g400 this mousepad is very bad too!!!

It's the greatest mouse that I just used!

After some experimentation, I found the best way to use a tap fix. [[SPOILER]] I sealed with the tape slightly-more 1/3 lens. The brightness of LED decreased.LOD is less than 1 CD! The sensor works much better than with a simple tape fix...

I think the problem with a high LOD of fw 61 and for other optical sensors for different black surfaces can be solved by changing the brightness of the LEDs. For example, on a black surface the LED is brighter therefore the LOD is higher...