Posts by Mitch311

I have the Gigabyte H77N-WIFI mITX motherboard. At the moment I have a Prolimatech Samuel 17 & Akasa Apache 120mm fan cooling an i5-3450. Idle temps are around 18-22 degrees and max out at around 60-63 degrees running prime95. Plenty of...

Quote:Originally Posted by WiSK  [[SPOILER]] This ATX24 cable above is for an SG05 with modular ST45SF-G PSU. Those white wires are 2.3mm and worked fine with MDPC crimper.I tried also with the standard SG05 PSU (see below). I made two...

Totally agree I would like to offer my thanks to everyone who goes out of their way to help others in this community. Even though I don't post much I read a lot on these forums and have gained a lot of insight and knowledge from kind...

Thanks Big Elf Will the thicker insulation be ok with the MDPC crimper and crimps? Nils suggests a maximum diameter of 2.2mm and nothing above that. I may just get 10m of the thinner wire to play with and see how it goes. I can always...

Ok, so I just bit the bullet and ordered the crimping tool and some other stuff from MDPC for my little project. Not the cheapest but hopefully its worth it. I am planning on moving my rig into a Silverstone Sugo SG05 in the next few...

Prolimatech Samuel 17 http://www.prolimatech.com/en/products/detail.asp?id=157 I'm using it on a Gigabyte mITX board and have no clearance issues with graphics card or RAM.

ok so I took a few crappy pictures for you, please excuse the cable management. Didn't want to buy extensions for a case that I will be replacing soon. Orientation: heatpipes run from top to bottom so the overhang of the fan is over the...

No mention on the price unfortunately, also they quoted the SG05B in the email so the all black version might not be included. Don't have the case yet and when I get it I will use the stock fan initially to see how loud it is before...

You could think about the Prolimatech Samuel 17 cooler. It fits on a Gigabyte H77N-WIFI mITX board which is a similar layout to the ASRock without blocking the PCI-E slot and seems to work very well. Doesn't come with a fan so you get...

Was looking at watercooling when I upgrade my parts in the next couple of months. I want a clean simple loop and was hoping to just use a single 180/200mm rad in the front of the case. Is this ok? From what I have read, the concensus...