Posts by airdeano

just an FYI, an additional mounting hardware kit can be purchased to allow this CPU block to be used on Intel 1155/1156 or 1366/2011 or AMD AM2/AM3 processors. i had to order direct from Watercool the hardware kit to swap from 1366/2011...

items received. really quick shipping and excellent PM replies.. these plumbing parts will go to good use. +1 skyn3t airdeano

got it.. and you got more matte black? airdeano

thank you for the excellent advice. I am really liking your suggestions a lot more,. trying to remove thousandths from the fragile grill vs. the easier is to .375" from the larger mass items. will let you know thursday/friday airdeano

i plan to leave the chassis and front panel opening stock. i'd' trim the flex-bay grill. the grill is easier to replace, than the chassis/panel. i'm open to any suggestions, because this is the angle i'd like to pursue. I've got a...

update 04-28-2013 I've ordered the MAC-161 (12-bay) and installed it into the front of the case. with some tinkering and adjusting, I believe it will fit with slight modifications. the tap-bungs are one-hole too high drill tap-bungs...

hello CaseLabs and members. I have an interesting issue and what to know does CaseLabs have a cure for this? this is a SM8 with a RX/UT60 480 wanting to be installed in the front. using spare 2x single flex-bay mounts, it is sooo...

mr cactus. YGPM from me.. airdeano

YGPM airdeano

Quote:Originally Posted by Wicked x Josh Got excited to see a CoolStream 240 FS but what in the world happened to it? wasn't a good factory paint application, to begin with. but other than light dust on the fins, it is 100% usable...