Posts by squick3n

The Helix would be my choice, but get the ones with PWM control. Only have them spin up high when needed

Buy more than 6' of tubing, You don't want to miss on a few cuts and then be out. I usually order 1.5x what I think I'll need. If it's your first loop, I'd order 2x

Thanks for the responses. I guess I missed that review by Martin. Seems like a "feature" more than a flaw

Quote:Originally Posted by Juggalo23451 Depending where you got it see if they can do a RMA Yeah it does seem line there's no point installing it. The seller will definitely exchange the unit, but I guess I'm just concerned, given...

Just got this in the mail today, and I've read around that the bump in the middle is a common issue. Should I even both with this, or try for a return? Should I move on from this model given how much trouble it seems to have? Thanks...

Quote:Originally Posted by Martinm210  If you have ideas or preferences in the testing you want to see first, let me know. That's what I am looking for in this thread. Thanks! Martin My overall feeling in general is that the web is...

Well I'll use PWM fans to try and keep things quiet during regular use. Went ahead and ordered earlier today after an email from MM answered my questions. Won't be going to LANs. but I will be moving it around traveling back and forth...

How was the noise with the APII? Seen conflicting reports of how loud it gets when mounted right to MB. Look forward to seeing more of your work!

I understand that these cases are almost all fans in some cases, but something like the H2GO, how loud do they get? I've read reviews that they get especially loud b/c they are aluminum and are looser than standard cases since they are...

Quote:Originally Posted by Martinm210 No, the 680 dual gpu based system shown at the end added an MCR220 and an MCR240 so it had three double rads dissipating heat. It was all run by the same H220 pump though and built upon that...