Posts by AnToNCheZ

Quote:Originally Posted by sieferswe Hey all my first post here. Have followed this thread with great interest the past days. Nice to see ppl pushing their cards to the max =P. Have flashed my Gigabyte 670GTX with Tecfreaks modded...

Hey all, anyone experienced any flicking textures on their new bios? I have had a little in BLR and Dirt 2, but only very minor and that is with the stock memory clock. It may just be the games, but wanted to ask before I flash back to...

Hey guys. I'm running the volt modded F4 bios for the Gigabyte OC card. Is it normal for the clock speed to not always run at maximum? I run Unigine on max w/o vsync and it stays at 1202Mhz, but I just got done testing out Dirt 2 (w/...

Quote:Originally Posted by Cape Cod Thx!!! Now I just need someone with the same 4 gb card to send me the bios of the card and I can try that. You should be able to find an official bios for your card on the manufactures website. I...

Quote:Originally Posted by Cape Cod I'm also getting this in device manager Windows has stopped this device because it has reported problems. (Code 43) I think If I can stop windows from stopping the card than maybe I can flash it...

Quote:Originally Posted by Shmerrick Looking forward to trying this. My 670 feels a bit weak at 1275 when compared to those 680s. I would hardly call that weak. If you are getting just shy of 1300Mhz on a stock bios, that, in my...

So the additional power limit hasn't really helped my clocks, as I expected. Although, I have stepped up from 1255 to 1268 on the core for one full run of Unigine, but I will need to test this for 30 mins or more to make sure it is...

Quote:Originally Posted by tecfreak I think only cards with an above averge power consumption will benefit from that bios and only as long the cooling system ist strong enough to keep the temps low. I will flash it and try anyway. I...

Quote:Originally Posted by tecfreak Test them and give me feedback. Gigabyte GTX 670 Windforce Version: 80.04.31.00.58 Voltage: 1.2125 GPU-Clock: 1202MHz Board Power: 200W(100%) -...

Quote:Originally Posted by eternal7trance My chip sucks so I'm not able to oc much higher than around 1280 core. However I do notice when hooking up the DMM that my voltage goes up to 1.222 and on GPUZ it says my TDP is 80%. The...