Posts by Rondik

Quote:Originally Posted by br030hk Hi guys, I just recently purchased ud5h.. also a first time builder, please allow me to ask some noob questions.. I see some people with great experience mention "Load Optimized Defaults," what...

Quote:Originally Posted by DBEAU Yeah you should be able to switch it over to SATA3_0 with no problems. But yeah.. I'm right there with ya, my machine boots up so fast it's unreal. Yeah so far the system has been rock solid stable...

Quote:Originally Posted by mandrix If the SSD is going to be your boot drive, stick it in SATA3_0. If all you're using is the SSD then it may not matter but if using HDD's as well then I would use _0. I can't give you a technical...

Thanks I will read that over! Oh forgot to ask does it matte if the SSD is plugged into the Intel SATA 3 0 or the Intel SATA 3 1? Basically can I use either one as long as it Intel? Or for better performance use SATA 3 0?

Quote:Originally Posted by DBEAU No, win 7 has drivers incorporated for install. You will want to update the SATA drivers after installation though. And have a look at this to help you along......

I had a question I have not had a chance to rebuild my win 7 system since i put build together. If i want to reinnstall on my crucial m4 ssd drive which is plugged into the intel sata port, do I need to install the intel sata driver...

Quote:Originally Posted by JollyMan I do not have a cpu fan plugged in because i am running watercooling. I was able to boot into windows before, so i assumed that the CPU fan not being plugged in would be ok. I will try and plug a...

Quote:Originally Posted by JollyMan ITs booted and shutoff at least 15 times currently...and counting...*** This is just a shot in a dark have not read all other replies so might have been mentioned. Is the cpu heatsink sitting...

Quote:Originally Posted by Sin0822 t. However these boards are very well built, i am sure everything is okay. I will second that, I did something really stupid and bad (should have done build on weekend when had more time that was...

Quote:Originally Posted by Snakes Not sure about your problem, but I've always read with Gigabyte boards that you should load optimized defaults when you're starting out or if you change something major. thanks that seemed to do...