Posts by mikeo01

1.380 isn't bad but temperature at idle is worrying. 1.332 seems like a sweet point at the moment for my 4.0Ghz OC, CPU current capacity really did help. EDIT: My stock VID is 1.2-1.224 load 1.248-1.284 That's with turbo enabled...

Hi thanks for the post The description about the current capacity really helped, I guess having it higher will definitely help my overclock. My CPU/NB is 1.150v at 2600mhz. I will see if I can increase that. Right now (been testing...

Hi all been happy running my Thuban (1045T) at 4.0Ghz 1.380vcore for around half a year now, but idle temperatures and constant 1.380 has been bothering me. I know it isn't high, but the lower the better. I have been wondering if anyone...

Yeah definitely be careful bending it, you could try and punch some holes through to give it some breathing space You could fit a 480 rad up in that top bay based on the pictures, may only need a slight mod to the top of the roof. I...

Hi, Yeah it actually doesn't make a difference because my VRM heatsink is in the way lol, so it actually makes me have the fan higher up. I was thinking about the rear, maybe there isn't enough negative pressure so may be some heat...

Ha Yeah I was a bit weary of using the splitter as there is 1.2A flowing through one PWM splitter cable when at full load. The cable is rated 26AWG so should be fine there. The side cover was lent against the side for both with and...

Funky colour lol it's my skillful painting UV paint. But funny enough I tried that fan facing down and also turned off, made no difference. I also have another one of the opposite side around the back. The last picture is the gap...

But I like my orange fans they don't want to move! Well here how it looks with one and two fans. It doesn't close to such a small gap, few mm.

Yeah. Right two days ago I tried 4.2Ghz with dual fans. Push Pull. Tried again today and got max temperature of 51c. Average 49c. I took away a fan because I was getting annoyed that the window wouldn't close so wanted to see how it...

OK been testing 4.2Ghz and I now have came to a very odd result. I think I know why but at the same time.. why. My RAM is high so it means my TY-143 is slightly higher making my window not fit (). So I decided to take it off and check...