Posts by Nihilo

Quote:Originally Posted by Iketh So you've confirmed c3/c6 is disabled. Are you gonna try enabled? It's on auto, so I might just leave it there. I'm going out of town this weekend, but maybe I'll mess with it when I get back.

Quote:Originally Posted by Iketh actually it's c1e that drops the multiplier to 16x... speedstep varies the multi depending on the load similar to how c3/c6 varies the volts Ahh gotcha. Well here's my load on one core prime It...

That's not C states, that's speedstep...at least with Asus that's what drops the multiplier at idle. C states drop the voltage at idle.

Could be the motherboard? Apparently Asus and Gigabyte are opposite of each other, so maybe Asrock is in line with Gigabyte?

Quote:Originally Posted by HardwareDecoder So i've been reading about the c-states and did my own test here is what I got..... OFF..... ON...... looks to me like c-states on/auto actually hurts performance on my...

Quote:Originally Posted by GeforceGTS Just ran AS SSD since I had cstates enabled to downclock/undervolt while idle, then rebooted and set them to auto, 4k-64 doubled :l Which is great 'n all but I'd like it to undervolt still.. Is...

Seems like you have adequate air flow. What's your ambient temps?

IBT will do that. Which version of P95 are you using?

Quote:Originally Posted by n00b sause my real question is how high do i need to up the voltage There's no real way for us to answer that. Each chip requires a different amount. You just have to play with it until it's stable. Try...

Quote:Originally Posted by n00b sause i want 4.4 not 4.6 Well you never mentioned that, but either way you'll have to up the voltage a bit above stock for 4.4