Posts by amd7674

I just picked up cheap ocz 120gb agility 3 and I use steam mover to move games around. So far I used it only with BF3 and it cut down time to load large maps (i.e. metro) a lot. Now I'm one of the first guys on the map vs. last one...

Quote:Originally Posted by vhsownsbeta I found that by improving air supply to my TOPs I was able to increase my stable OC. Previously I was at 1320 with temps hitting the 70s and throttling. By adding side intake I have dropped...

Quote:Originally Posted by vhsownsbeta If you are stable at 1228 then I would seriously reconsider flashing your bios... You have everything to lose for a negligible fps gain in BF3 with increased heat/noise etc... My 2c You are...

Quote:Originally Posted by Darylrese Guys, if your not getting a higher stable overclock on your non top cores, dont overclock the memory so high. I've noticed quite a few people are overclocking memory to +500 - +700 which is...

Quote:Originally Posted by abumuqaatil I managed to flash my card back to the original bios that's on techpowerup dated April 2012. I used Nvflash. Everything back to normal now. gpu set at 1200 and boosts to 1331. Happy...

Quote:Originally Posted by nonnac7 The reason I do stability testing is so that my games will run without crashing. BF3 is one of the most demanding graphical games currently, with me not crashing at 20mhz more on the core and...

ACHILEE5 thanks so much ;-) Edit: thank you it worked , BF3 worked perfectly fine... Metro MAP loads super fast now... I think I was the first one the map

Awesome thread Thanks OP. I have 64gb m4 SSD for my OS/apps. My Origin (BF3) and steam folders currently are installed on WD 640gb black hdd (failry fast 7200rpm drive). Since loading BF3 non-B2K maps takes forever and I picked up...

Asus non-top @ 1231 max boost... I had a driver (latest beta) restart when playing BF3 , when I checked AF’s log’s I noticed high Power Usage spike at the time… 388%. The temps were around 62C, and it was feeding 1.175V… . I checked...

Quote:Originally Posted by iatacs19 Anyone else having some sag? Mine seems to sag a bit where the power connectors are located. I'll check tonight... I've seen some peeps using plastic tie zips to hold the end of the card...