Posts by tinkererguy

Quote:Originally Posted by adiegoguy I am looking to use the ACHIEVA Shimian QH270-Lite in a digital signage setup on a kiosk and I cant find anywhere if this monitor will turn its self back on after a power failure assuming its...

Quote:Originally Posted by Niko-Time I have seen people report no problems and that Nvidia control panel states they are HDCP compliantSeeing the same thing, QNIX QX2700 LED shows as HDCP compliant in NVIDIA Control...

Interesting, similar issue here. While I do like the new BIOS, I have a USB 3.0 PCI card this system now doesn't like (HighPoint's RocketU 1144A), and suddenly, a DVD that used to boot (it's based on WinPE) now crashes. Same goes for...

Figured it out! Apparently, this 2.10 BIOS doesn't like my HighPoint USB 3.0 card very much, in any slot. Took it out, error 94 gone, all set, boots fine again. So if you happen to have this card, pull it out before you flash the...

Anybody else having issues with booting 2.10 successfully, if you have any PCI devices present? I'm getting blank video (doesn't boot) and error 94 on the mobo's LED, after the successful upgrade. The manual says it's "0x94 PCI Bus...