Posts by Psychosis5150

Mine was sporadic at best, sometimes it would post, usually not though. Also it would fail post at several different points unlike yours. My board has a memory test button that will reset timings in the BIOS but I did some Googling on...

I have an ASUS P8Z68 (not the same as yours, I know) I had issues getting to boot when running my ram at its full speed. Try setting your ram speed lower in bios or pulling a few sticks out. For some reason my board really didn't like...

Great job! I'm curious to see how waxing the pipes holds up for you. I clearcoated mine after polishing them and it added a satin look that I'm dealing with for now. Your scrap pile looked like mine, though I didn't want to show that! ...

Quote:Originally Posted by Boweezie You can connect the copper tubing with bitspower SLI multi link adapters...

Wish I would have known about those aquatuning fittings before starting my build.

Quote:Originally Posted by bomberjun such an awesome build!!! Great job!!! +1 rep to you as a first time watercooler yet you pulled it off!!!Thank you! Quote:Originally Posted by Boweezie Looks super sweet! Thanks for all the...

You should flush everything before installation. The radiators will still have flux and other residues in them that you don't want in your loop. There are some D5 style pumps that come without a housing that might skirt around the...

Quote:Originally Posted by ivoryg37 I will just be running the fans at fullspeed for now. The g1/4 plug I just got for the future. I'm still deciding if I want to get the heatkiller waterblock for my graphics card or wait for the...

Quote:Originally Posted by Big Elf It makes it crack, spectacularly.That's what I thought.

Is rubbing alcohol safe for acrylic? I thought it would corrode it.