New Posts  All Forums:

Posts by bondisdead

I will check it out tonight again, just to be sure that there is no blockage on the bottom. I no longer have it installed, as shown in the picture, as I went with a H50 instead. Just be very careful when you install the V8, as there is...
yes, I have gotten the CM V8 to fit on the board. However, I just tried a CM GeminII S524, and unfortunately the backplate is hindered on one corner by a component, likely a capacitor. You can mount it, but you better not tighten that...
For those looking to get this case, it's on sale right now at NewEgg for $88 with free shipping. They also have the silver one for the same price. http://www.newegg.com/Product/Product.aspx?Item=N82E16811112265
My setup ended up being very similar. Corsair H50 replacing the 140mm intake fan. Setup with push/pull and two Noctua 140mm fans. Nice thing about those fans is they have both 120mm and 140mm mounts, so they could attach to the H50...
PurdueMan - I see that you mounted this in a Lian Li Q08. What was your configuration for the H60's radiator and fans?
Here is yet another customer of a crashing ASUS GTX 670 TOP version! Just got it yesterday from Amazon. It crashes running 3dMark Vantage in two different systems. The systems are open, so there is plenty of cooling. The monitored temps...
yes, do share! I am putting this mobo in the Lian Li Q08 SFF case, but have had nothing but clearance issues with various heatsink configurations. This board might pose blockage issues when the fan is on the bottom, while my case might...
Are you sure that Big Shuriken will fit? There is the potenial blockage of the power-circuitry daughter board on the edge of the motherboard.
Based on your pictures, it appears that you have the two hard-drive cages removed. I imagine that helps with airlow from the front intake fan, not to mention providing much needed room for that monster 230mm fan! Do you know the RPMs on...
I am currently building a very similarly spec'd computer, except that I have the ASUS P8Z77-I Deluxe mini-itx board. The problem with the ASUS is that there is a daughter-board at the edge of the board which contains additional...
New Posts  All Forums: