Posts by technogiant

I guess you almost answered the question there....if graphene is 10X greater than copper then in a random orientation I suppose the worst case scenario would be that the 50% of the particles would have the wrong orientation and so drop...

So which pump is the problem?...the one circulating through the volenti or the one for the component water loop? If your getting problems in the volenti loop not spraying enough water I have an idea what may be wrong.......as there is...

Quote:Originally Posted by ZytheEKS What if they built a reactor cooler, with some type of heat exchangers? A reactor cooler, or as it's more commonly known in the computer cooling world, a Bong Cooler have been known to achieve...

Quote:Originally Posted by mmbrowncow I'd only be concerned about viscosity of the liquid. Viscosity is graphed in the post I made above. Take a look. The viscosity is lower than that of water.......it only approaches the...

Quote:Originally Posted by nub the only way evaporative cooling can get sub ambient is by venting the heat to atmosphere. Closed evaporative cooling without a compressor does exist, it is called a heat pipe. ignition of alcohol...

Quote:Originally Posted by nub Well it might work, have to be sure that your tubing is ok with alcohol. Would probably be cheaper in the short run to let the ethanol evaporate into the atmosphere. Building a rig to capture and...

As the vapor space would be sealed then loss of coolant shouldn't be a problem, though it would be easy enough to put a viewing window in the chamber or an external fluid level tube to keep an eye on it. It's not something I'm...

I'm getting some stuff together now, I've got the metal drain pan Uploaded with ImageShack.us The pic above shows my old x38 socket 775 atx mobo for size comparison. The basin is described as a 20 liter capacity. Its 15cm deep so...

Another forum member "gdesmo" has experimented with a graphene composite tim.....not sure if he used it in the end but might be worth dropping him a pm He reffered to it in his tec build...

Yeah, sorry Skeeter, I seem to have partly misread your intention, I thought you intended to use water as the working fluid...my bad...was early AM when I responded. Think the rest of what I said stands good though. If you are going to...