Posts by cisx

this board does not have LLC, for example i got 200x18 prime stable with auto volt, then 200x20 with 1.41v prime stable, and then 200 x 20.5 at 1.43 prime stable again, but i cant raise above further, can i play with nb and cpu nb...

IVE GOT A COOLERMASTER TX3, IS FINE, UNDER PRIME 95 GOT 62° CELCIUS, i cant drop the voltage, under 1.43v @ 4.1 ghz runs prime excellent for a lot of hours, but at 1.42v fails at 30min or less, power saving options are disabled, NB...

I cant raise the voltage anymore, my msi 990xa gd55 DONT LET ME RAISE ABOVE 1.446v, ive got auto voltage for nb cpu and nb, what other thing could i do????

I cant raise the voltage anymore, my msi 990xa gd55 cant pass 1.446v, ive got auto voltage for nb cpu and nb, what other thing could i do????

I DONT KNOW HOW DO YOU MAKE TO RUN YOUR 560TI WITH THAT POWER SUPPLY??

i dont know why i must (necessarily) use a 13 multi for ht and nb clocks, ive got rated fsb 2600mhz and nb 2600mhz too, i i drop the frequency it fails to prime95 in seconds, now i drop the cpu voltage to 1.392 under prime 95 and seeing...

ive got a phenom ii stock cooler with heatpipes, max 65-67 °c, im dropping the voltages

better, im dropping the voltage and testing only with prime because OCCT and IBT are not confiable

max temp is c°67, im going to look your links, thanks!!!!

At last i got my FX 6100 @ 4260 MHZ, tested with Prime 64bit and Occt, for about 1 hour. settings: 213MHZ X 20 1.494V CPU VOLTAGE 1.296V CPU NB VOLTAGE AUTO NB VOLTAGE DDR3@1704MHZ 9-9-9-26-35 1T 1.65V HT LINK & NB RATIO X13 =...