Posts by Art Vanelay

Quote:Originally Posted by Sethris225 New thread. When in doubt, new thread. Plus it's just a cleaner way to do it.Just change the title. You can pretend your build log was awesome enough to inspire 30 pages of discussion.

Woo I'm in the 5GHz club. Now all I need to do is get sufficient cooling to join the 5GHz sandy stable club lol. It took 1.428V to get my chip stable at 4.8GHz, I doubt I'm gonna be able to manage 5.0 GHz on a voltage that I'd like to...

Since I have enabled this lightboost hack, steam has had this weird banding effect on black and grey surfaces, like the color depth wasn't enough. Does anyone know how to fix this? I fixed it once by setting the color depth to 32 bit (it...

Just got my new cooler installed, so I figured I'd join this club. http://valid.canardpc.com/2811538

Well, I got back to my computer today and decided to run a stress test, and the maximum temperature on small FFTs was now 87 degrees instead of over 90 degrees. The ambient temperature doesn't seem to have changed significantly. The top...

Quote:Originally Posted by doyll The base of cooler gets hot, the top of the pipes is usually not. Liquid vaporizes in pipes at base. The expansion of vaporizing pushes vapor out toward the ends and as it cools and condenses it...

Quote:Originally Posted by doyll Sorry I can't tell you what the temps would be. Chips perform differently when overclocked.. some get real hot, some don't.Well, do D14s tend to get hot to the touch when running at high voltages...

Quote:Originally Posted by doyll The K2 and NH-D14 are about same at cooling. Moparman did tested them and found 2-3c max...

Damn you people in the US. Why can't I be you?

Quote:Originally Posted by Conners  I have tried it a few time but have seen that it sets voltages way higher than they need to be... That's my only problem with it. But then again I don't even use ET6 anymore.When I set the...