Posts by ivanz

default bios use vcore 1.42v . i set vcore 1,25, but bios use 1,29. it is good or bad? If the voltage is set 1,42, built-in sensor (mb) shows the temperature of greater than 60C. If set 1.25 shows the ~50. Difference between the sensor...

Quote:Originally Posted by Gyro The 590 chipset does not have the ATI slow boot problem, only 560 and 570 chipsets. Gyrothank you very much. I do not know. I just talked about the problems at the start

del

Gyro I know that PCI-e 3.0 is backwards compatible to 1.0. I am not sure that everything will be fine. + chipset nvidia nforce 590 sli, videocard - ati...

Quote:Originally Posted by ozlay It should work fine with that board make sure to use latest drivers from ati thank you. you do not accidentally try? or can anyone know? may be a problem when you connect the video card, because the...

Quote:Originally Posted by ozlay well we dont know what board you have post your specs plz as for the enermax psu yes it will support the 7850 but we need to know the rest of your computers spec to tell you if it will work with the...

I want to buy radeon 7850 instead of the old radeon 1950 pro. Graphics Port MB - 1.0, videocard - 3.0. PCI Express is backwards compatible (1.0 VGA should work on a 3.0 MB and a 3.0 VGA should work on a 1.0 MB). What do you think,...