Quote:Originally Posted by bomberjun will be rebuilding my blackbox soon.
upgrading to ............... hmmmmmmmmmmmmm I'm gonna guess LGA2011, but I don't know if you are going to be switching mobo's and all that... So it might...
Quote:Originally Posted by Sethy666 The H100 is okay.
Ive had my 3930k up to 4.7 ghz while folding and it gets about low 70s. ( I have push pull with AP 15s)
Ive had the vcore temp nudge 80c a few times but its getting into Summer...
Quote:Originally Posted by Fantasy Good news. you don't need to RMA your board. its perfectly fine.
I just switched my 4 dimms of ram from the red slots to the black slots and my board throw error code 65 for me.
so if you only have...
Quote:Originally Posted by Fantasy just silly question, do you have power on all of these you see in the picture?
I've got the 4 and 8 pin EPS plugged in, but I don't think I need the 6 pin PCIe power, because I only have 2 gpu's.
Quote:Originally Posted by Fantasy ok nvm I read your older post.
well sorry to hear about your board. you should RMA the board then.Is there any possibility of it being the CPU? Because I don't want to send back the board and be...
Quote:Originally Posted by Fantasy 80C !!!! that is way way too high at stock speeds. is your H100 fans working at full speed 2000RPM?
lets try 1866MHz @ 11-11-11-24 @ 1.6V
also your Rig say that you have 4X4GB which is 16GB of RAM....
Quote:Originally Posted by Fantasy did you try my OC settings?
look just listen to me and try this.
1- press the Cmos button.
2- Go to your BIOS.
3- Set your RAM frequency to 1600MHz.
4- Set your RAM timing to 10-10-10-24.