Posts by ti20n

I don't believe that's quite right. MV-3V4G3D/US (low profile) appears rated for both 1.35v +/- 5% and 1.50v +-5%. I've run them from 1.35v to 1.60v without issues.

Prime95 is a low-priority application, it shouldn't slow down gaming or web browsing :-)

Quote:Originally Posted by sherlock My 4.5 Ghz OC on i5-3570K just passed a 12 hour continuous prime Blend 90% ram test, which means my 2133 9-10-10-26 1.5V 1T Samsung Rams passed as well[/URL] These chip (or Ivy IMC) could run 2133...

Tjmax for Ivy is 105oC (the temperature where it starts throttling), so I personally aim at 90oC as my target max summer-temp for IBT runs.

Quote:Originally Posted by sintinian I had to up the vcore to 1.368 for a stable clock of 4.5Ghz with around 80 max temperature Your 3570K may be below average, but you shouldn't look at high vCore being the end-all criteria (esp if...

Quote:Originally Posted by ElevenEleven Alright, I swapped to 9-10-10-28-1T 2000MHz @ 1.45V for now Nice, almost exactly what I run. 1.46V for rock stable 2000 9-10-10-28-1T. A couple notes to other readers: Some Ivy's will still...

First, you should figure out why you're getting 85oC at only 1.20v... (bad thermal paste application?)

Not bad, average.

I think it's a browser issue. If you open this with a mobile phone, you can probably zoom in. But on IE it will only zoom up to your current screen width.

Quote:Originally Posted by mrtoyotaco I don't consider 1.3volts for 4.6ghz bad. Some people can't even get 4.6ghz STABLE. Be thankful. Yep, 3570K 'average' = 45x, 3770K 'average' = 46x. Although very recent batches could be doing...