Posts by Saurk66

Quote:Originally Posted by ppeewang anyone ? I have an Antec 620 installed, with the radiator in the front middle fan bay with a push/pull setup. Works like a charm. I am over-clocking an i3570k to 4.2GHz with no temp issues under...

Quote:Originally Posted by Pidoma I am loving the case too however I did move some fans around and add some more and the plastic fan mounts on the side panels broke off. I have two broken fan mounts now so be careful. I was using...

Ok, finally my build is complete. Check it...

Ok, got the EVGA GTX 670 FTW installed and the new BenQ 24" monitor hooked up. Finally, here are some pics of my rig up and running.

Finally! Installing my new EVGA GTX 670 FTW this weekend and hooking to my 24" BenQ mon. More pics once it up and running. Hey, btw, Sniper I posted pics of my system (almost complete) awhile ago...do I get on the list? Or does my...

Quote:Originally Posted by SPMOkc73 Those temps are safe, but Im running @ 4.2 with only the H60 and hit 53C on the high end. Ambient temps could be a factor, my room is about 72F (22C). I at 4.4GHz at stock voltage with a Kuhler...

Quote:Originally Posted by whitestsand Hello All!! Last week a lighting storm took out my ASRock Z68 Ex4 Gen3........ At the time I was bummed, but it turned out to be a blessing!!!! My CPU and PSU survived so I checked out...

Morning! Last night I downloaded 3D Mark and Real Temp. Ran a 3D Mark Test with Real Temp open in the background. The max core temp I got a 4.3GHz was 57C, the average was around 50c. I think tonight I will bump the voltage up a tiny...

Ok, downloaded real temp and 3D Mark to do some benchmarking the right way.... ....feeling like a noob right now....doh!

Nice looking rig. I use a Kuhler 620 that I mounted in the top front fan slot. I used the stock case fan in front and the 4-pin fan (connected to the CPU Fan Header) to the back in a push/pull config. It keeps it out of the way of the...