Posts by clownboy

Quote:I use the complete kit for ARCTIC HD7970 How are the Hink sinks working out for you? I have both 7970 and 670 ftw and i'm looking for a heat sink solution to work with the Dwood bracket. will the package work with both the 7970 and...

Quote:You dont go only by the size of the rad. The X40/X60 also has larger tubes, improved cold plate (Not the same as the 620/920), also the FPi (Fins per Inch) of the rad. Plate heat transfer is important yes, but from what it looks...

I can understand why the kraken x60 is 27mm deep, with it being top of case and all. What I don't get is why the X40 is only 27 mm deep. kraken x40 Dimension 138.4 x 27.0 x 172.5mm This is: 25% LESS heat dissipation capability than the...

I’d like to know if the copper heat transfer plates on the krakens are the same specs as the copper plates on the rest of the Asetek re-badged products. If they are, then I can't see how the larger radiator would help any. The finish on...

Hi Dwood, So I have a spare antec 920 and I'm debating using it as a cooler for a GTX 670 (maybe 680 but doubt it) 1: will your adapter work for this setup? 2: what would be the best bet for cooling VRM's and memory without the fan?...

So I am thinking of changing out the radiator of my 920 for a Alphacool monsta 120, maybe even a monsta 240. The 120 will offer over double the cooling surface. The RAD has a fill port so the way I see it, I can cut the tubes on the rad...