Posts by Torn

Well we are both thing the same on the capillary tube. I allready have purchased 10ft of 0.04" which I was going to use 6ft for R134a for this application. I will try and reduce it down a bit until that range. It might be a little...

What is your recommendation on the length of 1/4" to use. I want to stick with 1/4" for space issues getting the coil in my reservoir. I could ways make a 3/8 OD ft, but would like to stick with 1/4". What is the draw back if the...

Drew! Thanks for the reply and input. I have read many of your post on forums. I don't have much time but wanted to talk about the Evaporator real quick. The evaporator coil I made if roughly 20ft to 25ft in length. i do plan to put...

Update!! I have just about finished the Tower and base. I have also finished my evaporator. All pictures attached. Don't be scared to comment. Ask a question or even better give some advice . I know there has to be some more...

Hello World so to speak!! This is my first post on any forum regarding this type of subject matter. So bare with me as I try my best to explain my thoughts and build. For my first build I didn't want to go straight into a Direct die...