Posts by Borarah

Quote:Originally Posted by sectionsone Need comment for my updated project mini [[SPOILER]] This is jizz material. Do you mind listing your specs? I might be building one soon

Is that the Pastel Raspberry Purple?

Nice, looks very "similar" to Malik's but...

Quote:Originally Posted by Socks keep you warm You shouldn't have done all those crosses! Like the CPU waterblock is the wrong way, inlet should be to the right for a better and cleaner look. Awks... bahahaha. What tubing you using...

Just got my 2nd hand Antec Kuhler 620. Identical, if not very similar temps to my old U12P. I am using a Gelid Silent 12 atm though, as opposed to my old Noiseblocker fans so yeah, once i slap them on, I'm sure my kuhler would surpass...

Quote:Originally Posted by airdeano ive got a midi drilled and de-rivetted and there is literally no room in that area without major modifications. 7/16" hose is 5/8" (.625") OD. so you are .125" too big, add another .09" for a...

Quote:Originally Posted by airdeano itll be quite thin between the motherboard and rear chassis for a pass-through. even a bulkhead fitting would be a tight fit in that location. the motherboard tray has a flange that rivets to the...

Quote:Originally Posted by Borarah Hey guys. I'm planning a new build with the Arc Midi and was planning to route 7/16 tubing behind the mobo tray (will be using a MO-RA3). Would there be enough clearance to do that without putting...

Quote:Originally Posted by Hicountryrider I had posted some fan questions about this case earlier with no response. I've managed to sort of figure it out myself but still would like an opinion in regards to needing a rear exhaust...

Hey guys. I'm planning a new build with the Arc Midi and was planning to route 7/16 tubing behind the mobo tray (will be using a MO-RA3). Would there be enough clearance to do that without putting pressure on tubing. Here's a pic to...