Posts by Arinmal

yea I disabled the vid card in the bios, the setting you said was there. anyways didnt help, the pc is still very unstable over 3.4ghz I may just buy a new mb

I'm guessing my on board vid is disabled becuase device manager is only showing the 6950, the bios however doesnt give the option to disable, only the order which to use

lol when xd_1771 said I needed cooling I thought he ment to go to 4ghz or something, didnt realize he ment right away. so should I find a way to cool the vrm on this board or buy a new board with a heatsink?

so that guide says my motherboard doesnt have a heatsink on the vrm-mosfets and when getting too hot will throttle. maybe thats whats going on?

yea at 3.4ghz the cpu wants 1.4v at least which seems odd. was just reading about the vrm temps and cooling, how do I check VRM temps on the...

We lowered the multiplier cause i couldnt get past 3.3ghz stable. Im looking at the guide you posted Schmuckley (its just what I was looking for) but i do have a question, everytime I have a crash or issue it seems like its ram. The...

i'll try more tomorrow and see what happens

when it blue screens it always does the same thing, horizontal lines then blue screen raising the vcore to 1.4 let me go to 3.4ghz but I don't understand when hwmonitor says its only using 1.36?? should I keep raming up the bus speed...

stable at these settings once I set the bus speed to 252 for 3.4ghz it becomes unstable

BSOD in the first 5 seconds, I just lowered the ram to 8-8-8-24 to see it that helps, I read on a forum where a guy was oc'ing with the same ram as me and corsair recommended those settings. we shall see lol EDIT: yea it didnt like...