New Posts  All Forums:

Posts by unknownblood

after 8 good years my 3870x2 has finely given up, i'm looking at a Sapphire Radeon HD 7770 GHz Edition OC 1G, the MSI N650 Power Edition 1GD5/OC or the Radeon HD 6870 1GB but i have no idea which one would be better im open for...
do you know how i could check how fast they are actually running then? also how would you recommend me to up the speed of them properly these are the speeds of my phenom x4 995
well i've been able to overclock to 4.3ghz but after a while programs start to crash, i was hoping that you had some experience overclocking this exact motherboard so i could get a rough estimate on max frequency's since my temps for the...
Quote:Originally Posted by Schmuckley http://www.geeks.com/details.asp?invtid=M4A87TD-EVO-PB-2R&cat=MBB check back @ this site..they restock often..That board is OK..but..you'd need 10-15 more dollars..and the board vrms aren't...
i've got the 995 non black edition and i've been able to get a stable 4,3ghz, all i had to do to get it stable was up the power, lock my ram to 2,5ghz and change the pcie freq to 120mhz try some settings out untill you get it right and...
atm im running them at 2500mhz, howmuch more can i push them without ruining them?
i've had it completely opened up when i had to bake it, i took the opportunity to clean out all dust from inside the heat sink while it was removed only 1week till paycheck, should i get a XFX HD 7770 Black Edition Super Overclock 1 GB...
well i guess id have to go find something else to play while i wait for the stores to open and i can buy some new thermal paste, thanks for the reply's everyone
this is after playing for 5mins on the lowest settings everything disabled i could get some new thermal paste tomorrow when the stores open but is there something other than new thermal i can get tomorrow that will work even better?
i realy dont think its the thermal paste since i just checked while playing witcher 2 in windowed mode only one gpu is active with an activity of 60+- % while the other stays at 0% and not being used at all is there a way to use both...
New Posts  All Forums: