Posts by Coswar

Thanks , I will have a closer look at that setting and report back

So I recently updated my aging Phenom II 840 , and got myself an FX 8320 and a new mobo to match. The problem is that when I go to the BIOS to overclock , I can't even see the Multiplier option....I don't know if I'm missing something,...

Il look into buying them, but I don't see how the 80mm fan is supposed to blow through my CPU cooler? I tried to set it earlier to blow across the vrms but i couldn't get close enough to blow any worthwhile amount of air near them.

Brilliant , il check it out

ok will do, and can you help me with the settings?, not sure how i can increase this o.c Thanks a mill

Ok, so il point my 90mm fan to the vrms, would that be sufficient?

So where is the vrm located on the board? (so i can check if it has a heatsink or not and maybe point a fan towards it)

What do you mean by that? I need to purchase another cooler? The freezer pro has two fans and the one at the bottom is meant to cool the mobo, apart from that i have 3 120mm case fans(2 intake, 1 exhaust) and a 140mm exhaust. Isn't...

Looking at that link you gave i can see its the /USB3 version because it supports up to 140w CPUs. Thanks

Hey , I've got it up to 3.85ghz stable at the moment using : vcore 1.475, CPUNB 1.225 , Multiplier 15x and frequency of 256mhz. As for the cpu its rated 95w, and yeah the 4250 is integrated but I'm using it for dual screen , mainly...