Posts by Eeyore888

I don't have a ton of money to spend on a board right now. I'm getting the 4770k and Gigabyte UD5H. Will that board give me the same OC potential as the Crosshair?

Bottlenecked he says... powering 4 7950's and bottlenecked he says...

Very nice. I've only ever cut it with a torch lol... Then TIG welding that stuff is a B****!!! AMD systems do not utilize 3.0 It all goes backwards compatible and runs in 2.0 I have the same cpu/mobo as you

Careful cutting that SS. If it gets too hot, you're going to brown the metal. If you do brown it, just go all the way and heat it all up and pour some oil it! It will give it that sexy oil pattern. But yeah, I want the Haswell for the...

Dude lol... Those Haswell's are stupid fast! On the SuperPi charts, they have already decimated the 3770k without even fine tuning the memory!

Max temp is 49c 4.8ghz 1.464v. I have a really hot room, but in the winter I can hit 5ghz 1.48v GPU's are not in the water loop YET. They don't really need it for stock OC. Max temp on them is 60c 50% fan speed. Blocks are $100 each and...

You should switch over to Haswell too That's what I'm doing Once my cpu/mobo sell, I will be ordering the UD5H and 4770k muahahahahaha Buttttttttt.... won't look as cool as your setup!

... That's it... I'm selling my AMD gear and going Haswell... lol thanks for murdering another AMD fan.

I saw a build with a water block on the back of the motherboard for the CPU! It was pretty sweet! It would probably drop temps by 1-5c possibly more because my cors run at 18c while socket is about 30c. If you have a hot house, then that...

DUDE!!! YOU NEED A REAR MOUNTED CPU WATER BLOCK TOO!!! I'm thinking about doing that and swapping out my rads for a truck radiator, put it under the house and run the hoses through the floor lol. All of course after I get my GPU...