Posts by invincible20xx

somebody in here got the X-series 1250W ?

Quote:Originally Posted by AndyM95 Software voltage readings are rarely accurate. The SeaSonic X-1250, in a worst case scenario, has a voltage regulation of 0.6%. You won't get readings on the 12V rail under 100% load of less than...

Quote:Originally Posted by shilka RMA it Its broken if it does it when the PC is off sigh, anybody else got that same model can check with me if it whines while it's off ?!

so today i was rerouting some cables and i noticed that the seasonic unit is making this infamous coil whine sound, the computer was off but the psu still whined because the psu was connected to the wall, it's not that loud i guess won't...

some more input please ? nobody got that PSU ?

Quote:Originally Posted by CannedBullets How can I tell what the voltage is on the 12v rail? What's it labeled as under HWMonitor? load your PC using furmark and prime 95 at the same time, install hwinfo64 and get the reading from...

Quote:Originally Posted by CannedBullets I'm not overclocking and Windows doesn't display any errors.I ran a full virus scan, sfc /scannow, and a Windows Memory Diagnostic, all of them turned up clean. so it could be the power...

Quote:Originally Posted by CannedBullets I'm on an X650, and my PC just randomly rebooted itself today. First time its happened and my motherboard bios is set to stock. Could setting the power supply to hybrid mode cause this? I...

Quote:Originally Posted by AddictedGamer93 Sig rig. Ran IBT on maximum and Furmark @ 1920 x 1080 with 8x MSAA. with only 1 GPU ? 7950 ?

Quote:Originally Posted by AddictedGamer93 11.827v. My psu is identical internally so I figured I would post my results. i see what are you loading it with ? what gpus do you have ? mine is loaded by 2 x 7970