Posts by RiotShield

Mine is a 1.1 usb 3 with an F12 bios, many thanks mezmenir for all the advice, i will try it at ultra and see what happens, if it runs stable with the NBV at 1.3+ then i will post OCCT pics and then throttle back to the 3.9 i am running...

Had 5 BSOD trying to write posts, so i have dropped back a bit again to re-access my settings and set up. In the end i had these settings CPU.v 1.45v @ 4.004Ghz but drawing 1.472v under load NB F @ 2574Mhz Ram @1144Mhz and tried @...

It's in advance bois features from main bios menu list at the top of the menu.

We may have a winner, 4.004Ghz running stability tests now, increased LLC to high and CPUNB.V to 1.175 and lowered HHT clock multi by 1 to 2002Mhz, ram now running at just under 1600. http://valid.canardpc.com/show_oc.php?id=2516952

Okay thanks for the info i will try that now and my ram is rated 1600 (CMZ8GX3M2A1600C9 ) will post results shortly.

Quote:Originally Posted by mezmenir 160ns+ is only useful if you are experiencing boot failure due to FSB beyond what your RAM deems "viable". Take LLC off auto and find a good place for it. On my 990XAUD3, "Auto" was the equivalent...

Altering my timings and dropping down to under 1333mhz has given me 4Ghz see the link at the top of this page.

Quote:Originally Posted by mezmenir Wow, it takes 1.47v to get that chip stable at 3.6? Or do you just have the LLC cranked up to High/Ultra? Little high it seems, but nice overclock. LLC is set to auto, but my bios cpu.v is reading...

I now have my 1055T running at this stable. http://valid.canardpc.com/show_oc.php?id=2515990

http://valid.canardpc.com/show_oc.php?id=2515990