New Posts  All Forums:

Posts by BSLSK05

Am I right in saying that, like M2033, this is an NVidia The Way its Meant to be Played title? If so, the bias is well founded and completely expected. Both camps have their own side developing studios but I never hear crap about AMD...
This is sad to hear, I have been a Corsair loyalist for years and would recommend their products to anyone building for the first time, but after how this situation is being handled, I'm not so sure. Of all of my corsair products: 2...
The big issue isn't with the sticks themselves, but with the chip's Integrated Memory Controller (IMC). The generally accepted rule is that Sandy Bridge should not be taken over 1.65 volts. Intel, for their part, says not to exceed 1.575...
Quote:Originally Posted by AndySarsen That depends on where you want to mount it. If you don't want to lose the sound insulation on the top, which should accomodate up to a 280mm cooler I have already removed it to run some cables...
I have a question, I have an R3 that I would like some cooling advice on. What is the best AIO that I can fit in there, or, should I just go air with the massive phantek cooler or the noctua d14?
Any ideas? Anyone? Hello......?
So, what's the best I can get that will fit in my case?
Ambient for me is about 22c, I think. I have no way of measuring it The temp probe somewhere on my motherboard reads 35c after sitting at idle for a few minutes.
At stock, optimised defaults as my bios calls it, I idle at 42c. Still not wonderful.
I disabled C1E and speedstep because they messed with my OC, but I left everything else alone.
New Posts  All Forums: