Posts by Willi

Quote:Originally Posted by PepeLapiu You are not likely to get 10-20 psi of water in your loop, much less 200 psi. Possibly that's why it leaks. High pressure might help "squeeze" the pipes against the o-rings and, in push-fittings,...

Its amazing how a watercooler system can lower the deltas and keep things under control even under load. Love your build, all the attention to detail, the patience in fitting it all. I still think that using white-powdercoated copper...

Its a symphony in orange! Your painting skills are amazing. Love how Dwood's work looks now that it's painted

Nateman, you are an artist. That block looks amazing, makes me want to buy an extreme11 just to watercool it. Do you plan on plexi cover for that block? and Chris, I'm so glad you´re taking your time. It´s builds like these that got me...

Thanks for the help, Madgoat, I like the logysis and the dual heatpipe, but sadly newegg won't ship anything to Brazil. The only one that sends here with decent shipping costs is PPC'S. Sadly I have to choose from what they have in stock

just got this northbridge cooler and found out it wont fit the 990FX, the push-through holes on the mobo are too far apart. Is there any decently good aftermarket NB cooler that will fit this mobo? I'm having a hard time even when it...

if the weld-fittings you're talking about are similar to this then you got a problem, since you'll have to weld the pipe to the fitting (literally) and that might be a serious issue when you start your final build. I'd go with...

I think you can sleeve it with red-chromed metallic braid (if you can find it, but this is OCN, people seem to find the most impossible parts for casemodding, it seems). An example is Synthetic Anatomy casemod by Rognin, but he used...

Quote:Originally Posted by deafboy You can bend the stainless without too much trouble with the hand benders but you have to get special fittings for stainless as most push fit fittings don't have enough bit to grab the...

Oh, and B Neg, thanks a lot for that tutorial on how to recover acrylic surfaces... I live in brazil so it might be a bit harder to get that jet torch. Is it the one people use to cook/flambe desserts? If it is, it might be a bit easier...