Posts by Wenis

What a thread. OP, I'm glad you are excited about your new rig. It sucks that your old one burned up. You are lucky that it was just your rig, and not worse, even possibly your whole house. As an owner of a custom pc that I spent...

Quote:Originally Posted by Kevin_CL I completely agree about the 6/32 screws (that is if your in the US) With the exception of the M3 screws for the MB and the 10/32 screws for the feet/casters, every single screw in our cases are...

If I were you, I would not use m3 screws for custom work if in USA. They are more difficult to find than us standard sizes. I would instead use #6-32 screws. You can find these screws at any hardware store, and most home improvement...

I went and looked at my switch and everything looked fine. I then decided to go buy a new one and give it a shot. Now an hour after installation, everything seems to be working fine. Hopefully it stays that way! Thank you for...

Quote:Originally Posted by compalalaska I've had issues like that before with bad Coaxal cables. Everything works fine most the time, but like once a day I would loose all internet for 10 or 20 minutes and then it would fix itself....

Quote:Originally Posted by Oedipus Are any of the contacts crossed on the inside of the switch port? I can go down and check that out. It's just weird that it works part of the time. But then a few minutes later it stops working

I did completely bypass the switch and all seemed to work fine. The cables also tested fine. But when I test through the switch it shows errors. I'm lost

Hello, This weekend I decided it was time to finish my home network. Over the last few months, I ran cat 5e cables to different rooms in my house, and ran them to a central location in my basement. I then installed a belkin 8 port...

The Mink S3 A semiaquatic, carnivorous animal! (Wiki definition )

Nucleus S3