Posts by DAWOODAKRAM

also can anyone tell me when i boot into bios its fine. it only as windows loads first i get corruption then error 116 then blue screen driver error message. how come it manages ok in my bios?

ill try to post a pic tomorrow, thanks for the reply, i dont have soldering iron, but may but one if it fixes it,read an article about using very thin piece of wire and solder to fix, the mark i make is about a few mm very small but i...

im going to try and ill post back in a couple of days and let you know for future reference if this can be done or not. anyway happy ending wife felt bad i was so upset and bought me a gtx560ti. lol

ok thanks, yeah i slipped and you can see the 3 traces/wires have been cut through. i wondered about those pens that have conductive ink, would it be possible for me to join them with conductive ink??

HELP! GTX470 DAMAGED PCB WHILE DRILLING A SCREW OUT I SLIPPED DRILL TOUCHED PCB AND I CAN SEE SMALL BIT DAMAGE. NEAR CORE 3 SMALL LINES/WIRES HAVE BEEN CUT. NOW CARD BOOTS INTO BIOS OK, BUT AFTER THAT GIVES ERROR 116 BLUESCREEN. IS THIS...

Quote:Originally Posted by z3r0_k00l75 No unlocking on a 965 necessary as it's already a native quad-core. Just up the multiplier and away you go! You got a really nice deal on that chip btw. yeah i think if you look about (ebay)...

Quote:Originally Posted by TopicClocker I've had trouble with those cables as well, I just use DVI to DVI, I had that kind of cable and It would crash my display drivers, It may have been a poor or damaged cable or maybe my drivers...

ok well to explain i am using an lcd tv 19 inch, and a gtx275 with 2 dvi ports, the tv has vga or hdmi, so i can do vga with dvi to vga adapter that works, but when i try the dvi to hdmi it just wont work. also i had problems with tv...

GTX275 DVI TO HDMI WONT WORK i bought a cable and it just wont work, had some issues with edid modded it and works with vga but not dvi to hdmi any ideas? thanks

Quote:Originally Posted by sonicmat currently my cpu is running at 3.6ghz and nb freq at 2.4ghz. voltage on the cpu is at 1.380 and the nb voltage is 1 notch above standard. The cpu is a c2 stepping but im just concerned my vrm's...