Posts by undermined

Multi-driver "surround" headphones cannot ever be as good for the money as a pair of good stereo headphones. A lot of rather smart audio engineers and people that have studied human hearing scientifically have already done a ton of...

I'm pretty set on ordering a h220 now but I have a question. Does the fillport need to be facing "up" and if so aren't the fans then set by default to push the intake into the case if I place it up top in my Arc Midi? Also I was...

Quote:Originally Posted by Phelan I ran an Apogee Drive II, which is simlar size but has a larger fitting, on an Asus Maximus V Gene without problems on 2 different sets of RAM (Crucial Tracers and Avexir CORE), if that helps as a...

I was wondering if anyone knows if the h220 AIO might block the some ram slots on a p8z68 v-pro? It seems like the inlet/outlets might be too close to the first slot, and I populate all 4 slots since I run 4x4GB sticks so is it possible...

Grabbed a 830 256GB on sale from Amazon and Installed the enterprise 90-day evaluation version of Windows 8 on it to test applications and setting before I move to Windows 8. running on a p8z68 v-pro w/ the modified BIOS that has the...

Nice, FedEx managed to drop off my board to the actual address I wrote in my order after they drove it around for a leisurely ride through the neighborhood looking for a non-existent address yesterday. got one with the old branding...

If there are only 6 screw holes in the motherboard then it is fine with only 6 standoffs. If you and the unused ones your risk damaging the traces on the back of the board or shorting the board out. PCB boards are flexible so to an...

I'm also wondering if this 280x140mm version would fit well in a arc midi without mods, since looking at mine , only the 120mm rad mounts are offset towards the door to help a push/pull setup fit easily. A push setup 180x180mm AIO...

Quote:Originally Posted by nubbinator I asked for the same thing, still got one with all kinds of branding. I'm ok with the branding, I figured I'd ask just incase since the newer ones branding is better looking...

Quote:Originally Posted by nubbinator I ordered mine in the evening of the 23rd and got it yesterday morning. Hope I didn't slow it down by asking for a newer revision with less branding. thanks for the reply's all