Posts by DrBrogbo

Kind of flawed testing methodology, since they rely on users to set their own geographic location, and only have a set list of words to test for, but interesting. It kind of reminds of the social testing that the people behind the...

Quote:Originally Posted by KSIMP88 So... about 400 Kilobytes per second upload constant. Or 3.2 Megabits per second upload+download constant. OR.... let's say 1/2 of that is youtube uploads, even though you said MOST. That's about...

Thanks for the help, guys. +rep for both-a-y'alls.

I don't know if I'd say this shot is super unique, but it was timed perfectly. It's my main sniper getting a critical headshot in XCOM.

So everything else looks good? Do I need to do anything differently to get to 4.0GHz, or can I just keep doing the same thing: Drop CPU multiplier by one and start bumping up FSB speed/voltage until I get to 400, then put multiplier...

Quote:Originally Posted by unclewebb Your bios screen shot showed CPU Current Voltage at 1.2230 which is too low for 4000 MHz. Try enabling that vdroop setting I mentioned. On my old board, changing the bus speed also changes the...

Quote:Originally Posted by unclewebb I am pretty sure that most programs are not reading your CPU voltage correctly. It is hard to see your pictures after overclock.net has resized them. What bus speed and multi are you...

Quote:Originally Posted by unclewebb Open Hardware Monitor http://openhardwaremonitor.org/ AIDA64 http://www.aida64.com/ Try some other software to confirm your actual voltage when in Windows and the CPU is loaded. Your bios is...

Here are some screenshots of CPU-Z, CoreTemp, and Speedfan all running with Prime95 idle and load. IDLE LOAD

Quote:Originally Posted by unclewebb What voltage does CPU-Z report when your CPU is loaded with Prime95? Lack of voltage is usually what holds these CPUs back so don't be cheap with the volts. You might just need to Enable the...