New Posts  All Forums:

Posts by mikemartinco

just stick with the corsairs, ITS A FLAGSHIP LOGO
CFM is the amount of air a fans going to push STATIC PRESSURE is how strong its going to push that air under restriction or suction. if you put your hand infront of a cheap fan, it will slow down. if you put your hand infront of a high...
Quote:Originally Posted by 420Killah stuff thats a sealed gpu backplate, careful with the heat, seriously. the rest of the board isnt temperature monitored only the chip.
linus just did a 1500$ pc build with our case in white
the second slot is designed for a 3rd card only. thats what supposed to be connected to the second slot on the primary card. i automatically thought you were supposed to use two because ive seen so many pictures but after researching you...
I'm in for any!!!!!!
Omg in please please me
http://www.overclock.net/t/1208225/sleeving-molex-cables-and-6-pin-pcie-cables/0_50 edit - also heatshrink after you re-insert the pins so the shrink is tighter up against the plastic connector and you dont see the colored wire edit2 -...
just apply the vinyl like a sticker then take a new razor blade and trim the extra off
mines flimsy too
New Posts  All Forums: