Posts by thehacker11

I have a dead Sata drive, I have an identical drive of it that is IDE, same firmware, same size, same model, etc. Is it possible to swap the IDE controller onto the SATA drive with the dead SATA controller to get my data?

Heh, I don't mind if it is modular or not, I have 8 sata devices, and 8~ molex devices. I already have to use adapters on my current power supply.

Yep, it is a 3 year, and 8 month old toughpower. If it is most likely power, I am getting http://www.newegg.com/Product/Product.aspx?Item=N82E16817139006 or...

I have a almost 4 year old thermaltake 650watt, I have finally overclocked and over volted my msi hawk gtx 260 + 2600k. I have 7 SATA drives, 1 DVD burner, 6 fans, 2 PCI express e-sata cards, a gtx 260, 4x4gb (16GB) of ram, and a...

My 5.25's are full, I was thinking of pointing it exhaust up, but I am afraid of it drawing heat from the graphics card but I do have a slot cooler I forgot to mention that will be a slot or 2 below the gfx. Still don't know if I want to...

I just bought a NH-d14, what position should I put it in? I have all stock fans in a Antec900 case, front 2 120mm are intake, rear 120mm exhaust, top 200mm exhaust..no side fan

Correct me if I am wrong; but isn't the stock Antec tri-cool 79cfm @ 30dBA? The D12SM-12 looks like it only does 70CFM @ 33dBA

I have an antec 900. I am looking to replace the case fans with something higher CFM. Any recommendations for the 2 front intake fans, I can only do 120mmx25mm for the front and 120mmx38mm for the rear exhaust. Noise isn't too much of an...

Thanks! The slim and the mini have the same board?

I have a Dell Vostro 200 mini sitting as a server in a datacenter right now. I just have a quick question. Does anyone know what board the Vostro 200 Mini has? I Currently have the stock E4500 (800fsb) in it right now, anyone know if the...