Posts by shinji2k

I'm still hoping for cyberbrains in my lifetime. Hopefully I can overclock it.

Quote:Originally Posted by SpeedBump613 First off, fantastic build. I'm really diggin the design with the use of lots of different materials. If you were to tell people you are using, wood, plastic and aluminum to build a custom...

Quote:Originally Posted by amstech IPS > LED/LCD. LCD is the type of display, example: CRT, LCD, Plasma IPS is a type of LCD panel, example: TN, VA, IPS LED is a type of backlighting, example: CCFL, LED, RGBLED

You all are way too nice . But thanks for taking the time to check out my project. I always seem to end up not liking my mods shortly after I finish them.

Quote:Originally Posted by PCCstudent One more time.Compression fittings designed to be used with copper pipe are not the same as compression fittings designed to be used with plastic tubing.If you use a compression fitting designed...

Quote:Originally Posted by jcrandall623 That's out of my price range for this rig. I'm actually looking for a deal similar to this: $54.36 before $20 rebate for Antec Neo Eco 620w...

Quote:Originally Posted by snoogins I love the craftsmanship, but wish the build log would have been on OCN. The lack of comments on his build log made me sad a bit.The log in the CM forums is only there for the competition. The...

Quote:Originally Posted by jcrandall623 QUESTION: Would I have to replace this PSU within 5 years? No one can predict the future, but most likely, in your professional un-biased opinion, would I need to replace this PSU within 5...

It's a bit dated and weak on the 12V rail, but it's a decent performer. There are certainly better choices, but none of them are going to get close to $60 or $30 after MIR. I'd buy it if I didn't already have too many PSUs. Here's a...

Quote:Originally Posted by Kramy Hmm... I'm not sure how long it'll be good. I'd run the Extended SMART test to see what it says. If it passes, then you can at least experiment with it. You'll have to keep an eye on the drive for a...