Posts by bmaverick

Quote:Originally Posted by beezweeky  Ya, I got the manual already. Thanks for the pump by the way. I just picked up my rad today and now i have to wait for Newegg to send new TIM, the last tube I ordered got lost in mail, or go...

Quote:Originally Posted by Pupo Hi Its labeled LAING DDC -1P cheers The 1P is basically this ... DDC-1P: Pump with hard disk power connector. Halfway down this page download the pump manual...

Quote:Originally Posted by beezweeky I got a single ddc1t pump with a stock top. I there a preferable way to mount it, direction wise? ... Since you now have a Laing DDC-1T (aka MCP350) pump, you can download the manual that is...

If your system is limited on space, a DDC-1T (aka MCP350) with a performance top usually works well without cost much.

Simple .... Your pump is fighting against "gravity". The reservoir base needs to be at the same elevation as the pump with the pressure feeding the pump inlet. The pump is usually the lowest component in the loop. Shoot back a...

Quote:Originally Posted by chrisf4lc0n Hold on I have got a very similar setup and it does do the job just fine So, the pump outlet feed the larger RAD easily. That's a neat loop order.

Quote:Originally Posted by Electrocutor Over the long term, using a PWM 4-pin cable will save you more than the cable costs compared to the wasted electricity by undervolting using a 3-pin. Yes, I would agree. PWM does that very...

Quote:Originally Posted by joshontech I am getting a water pump for my cooling loop and it has a 4 pin connector but instead of mounting it in my case I want it on my desk next to the water intake but I bought a 3 pin extendor. Just...

Quote:Originally Posted by japanesegorilla It doesn't mask it completely but it is much better than not having it. Like I said, it's still not as good as wrapping the pump in a towel and sticking it in a padded envelope, but this...

Corsair once sold the Nautilus 500 that works with the 939 socket setup. The nice thing is, it's an external unit that can benefit the cramped case you are dealing with. The only item internal is the tubing and the water-blocks on the...