Posts by jonnyd91

Quote:Originally Posted by Superhuman So every time I turn on my computer, the CPU fan doesn't start spinning until about 5 seconds after I've pressed the power button. Is that happening to anyone else? I'm using Z77X-UD3H with...

Quote:Originally Posted by staryoshi Yes. I had mine at DDR3-1866 9-9-9-24 1.435v and they worked quite well. I'm moving them to another PC though for aesthetic reasons Have you tried to go any faster? Is 2400 possible with these...

Has anyone used these yet with the Z77 chipset and Ivy Bridge?

Quote:Originally Posted by Sin0822 its 30nm and this board doesn't have XMP, but those sticks will run at 1600mhz off the bat without any changes, you can basically just set ddrr 2200 and see if they boot. ok, so i can leave the...

Quote:Originally Posted by stasio Latest CPU-Z is 1.60.2 Beta. That's not the problem. Still trying to nail down exactly what is going on. Flashed bios F6 from GB website, so i Downgraded from F7. On reboot, i loaded optimized...

Quote:Originally Posted by CaptainChaos Make sure you have the latest version of CPU-Z. I had an older version that was giving me the same problem. im pretty sure i have the latest version. Some more info, Basically if I change the...

I am trying to OC my GB UD5H using most of the settings on the 1st page. I am only going up to 4.2GHz though. I go into the bios and under advanced Frequency settings I set the CPU clock ratio to 42 and my multiplier is set to 100.00....

i have really been out of the loop for a while, this is the first time in 4 years im OC my system. I OC my last system and just left it. I am just starting out simple, I go into the bios and under advanced Frequency settings I set the...

Quote:Originally Posted by valvehead Here There are both final and beta releases in that list. Thank You Sir

Where can i get the latest non-beta bios from? gigabytes site only is showing F5.