Posts by lsdmeasap

Whatever BIOS you decide to use, please be sure that you flash the backup BIOS to match the main BIOS version. Here's how for anyone that doesn't know, and you may need to use a PS/2 keyboard, or USB to PS/2...

Count me in, thanks!

In, thanks! I could really use this for air testing setups! I've been needing something better than the cheap Scythe I've been playing with the past few years

Sure GA-X58A-UD7 Rev. 1.0 F8 MOD Complete - Everyone, keep in mind this BIOS was pulled by Gigabyte for reasons unknown, so use at your own risk! Intel RAID ROM >> 11.5.0.1111 RealTek LAN >> 2.45 J.Micron ROM >> 1.07.28 Marvell >>...

Ya, Mushkin usually doesn't make it onto any compatibility lists because they are a smaller company and don't often get many samples out to manufacturers I don't tihnk. No worries there, I just said it in case you've heard of others...

What Vtt and IMC voltages are you trying? I can run Mushkin 997000 kit, which is 1600Mhz kit, at 2333Mhz at stock voltages using 9-11-10-31 timings. So I doubt it's the memory itself, unless your kit is damaged, you probably just need...

Not sure on that one? What you could try is reinstalling the latest Intel INF drivers, but use the -overall flag in command prompt. Get the latest here, you want first link...

Latest BIOS is fine, that was only a few isolated incidents and on older BIOSes. They may have even been set-up? You'll be fine, OC away, keep your VRM's cool though!

And this is the other kit he's referring to (using now) http://www.tweaktown.com/articles/4620/ivy_bridge_high_speed_ram_run_with_g_skill_pc3_20800_2666mhz_ripjawsz/index.html

Thanks for the info! Ya, I think PSC can do it very high like that too, we've just always been held back in the past by IMC's! Can't wait to check these boards out! I've got tons of memory, all different kind of IC's, so I'm sure...