Posts by ghettosuperstar

Quote: Originally Posted by ageNtreachery I notice you have your pump installed in an orientation that is shown as "not permitted" in the Laing manual. I've no idea if it can damage your pump or is just not a...

In.

Quote: Originally Posted by ageNtreachery I notice you have your pump installed in an orientation that is shown as "not permitted" in the Laing manual. I've no idea if it can damage your pump or is just not a...

Thanks, and I finally analyzed the temps. Ambient is 78F Idle is 29-31C or 84-88F Load is 34-38C or 93-100F And this is with distilled water only with silver. That's a nice delta on ambient in my opinion.

Let me in Coach. This is my CM690 build. I built a Heat Exchange Unit that's made out of wood. It contains two bonneville heater cores, a pump, reservoir, and block on the inside. This is probably version 4 of my setup. I started out...

Just get strips off silver of ebay. I will post a link tonight where I get mine. I am at work.

I got mine for stability and because it was brand new on ebay at half the price. Having an efficient and stable power supply really helps out with overclocking. And at one time I did have four 4850/4870 in crossfire. Talking about the...

I use distilled water and a shot of vodka in one loop, a shot of 92% alcohol in the other and I don't have algae problems. Loops has been active for 6 months.

I was given a Dell Emc2 AX150 SAN Server. It came with six 750 SATA drives and I can connect to the San and configure as I see fit. My problem is that the cost to add additional drives is astronomical. I am thinking $750 per 750gb...

Adding my two sense. If you are going to run all that I would recommend two separate loops with two pumps. Tell your friend to get another pump and have two loops. That would get rid of the y and t in the existing loops. I am not...