New Posts  All Forums:

Posts by Aleslammer

I've been to 1.78v with the card showing the same load dif. Idle temps spiked 6c (38c to 44c) when I hit the the 1.80 mark with a Zalman VF900. AM3 scaling falling over the 60% after 1.6v.
Had my AC on about 18c in the room, but was stacking runs. My daughter has a portable room AC unit she used when their central unit went south, got three days home this weekend so might try ducting it, floor fan, strait at the card and...
EVGA 8600 GT & 9400 GT, PNY 9400 GT. The two 94s were store bought and the 86 was mail.
I've got a closet full of cards taking a beating in the single card category in dire need of a solder iron, first step down. First mod: Image of the voltage on the run, max'd at 1.51, AM3: Work bench aftermath: Aleslammer - MSI...
Opps, sorry, wife broke her foot, got me jumpng, been called three time while trying to type this. I'm volted out, anything over whats in my bot post locks up among other things. If monies allow will pick a PS for my MCW60-T and give it...
Quote: Originally Posted by FtW 420 Right now Canada rules, you Americans gonna take that? Looks like its time to burn this card to the ground, No more mm jumps going to have to go for meters.
First Mod, pic not real good, doing the ram later wanted to test it. 1200 at 1.35v idle, ram sucks. http://hwbot.org/community/submissio...dr3_9793_marks
Samsung HC-12s on the MSI rated at 800, cheap side of things, ATI was using the HC-11s at 900, should of went with Giga, looking back. Saw some nice gains with memory increases in Aquamark but it was while I was jumping 25mhz at a time,...
Pencil Mod MSI card, other than card layout same as the Gigabyte. Grabbed the images from the egg, at work. Used a HB, 2HB & 4HB, with basically the same results with the 2 & 4, do check the resistance, had a nice little...
My first hard mod was a fail, card lived. The 200k’s (couldn’t find 100s) I had would only trim up to 5k after they were in installed so I either did something wrong or the VRs aren’t what I thought, checked ok on the DMM at 196...
New Posts  All Forums: