Posts by LuckySe7ens

Quote:Originally Posted by Obi-Wan-YJ Well... no, not really. I've been a Unix sysadmin since before Linux existed, so I don't need help configuring the system to run k10ctl at boot. What I need to know is how to make k10ctl do...

Quote:Originally Posted by Nudeood Hey all, I am planning on building a Gaming PC on a low budget of around £600 (this includes buying the OS, so £500 is more reasonable). I am not looking for a powerhouse PC, just something that...

Quote:Originally Posted by timaishu I apologize for the thread jack, but I was wondering about the UD3 as well. I am looking to get a fx-6350. I had been reading that the 990 boards were better for 125w cpus? Or is this only a...

Quote:Originally Posted by Obi-Wan-YJ Thanks for the pointer. I've got k10ctl installed now. After looking into its usage, I'm still a little confused. Here's what I've got on all four cores: Code: # k10ctl 0 VID interface...

Quote:Originally Posted by shilka HolyDriver in case you did not know that PSU you linked that Diablotek PDA That one is a system killer its one of the worst units money can...

Quote:Originally Posted by PureBlackFire if you're in the US48 this is the best presented option so far. this and this would also be fine. all of these are priced the same as the cx600 or cheaper. all superior units. yup! the xfx...

very cool, thanks for sharing! the tool chest really adds to the overall look

Quote:Originally Posted by DrSwizz Your CPU is running at 800MHz. You need to use this application to get it running at its proper frequency: http://www.ztex.de/misc/k10ctl.e.htmlexactly what he needed, rep

Quote:Originally Posted by Fossil 5000BE could hit 3ghz fairly easily. mine did 3.1 at stock volts, and 3.3 max

Quote:Originally Posted by ukic Googled and saw a default 1gb 9800gt requires 400w so I figured maybe it requires less. I am running it with a corsair cx430m psu manufacturers power requirements are always waaay over estimated due...