Posts by falven

Quote:Originally Posted by bumblebee1980 try Virtual Audio Cable. I actually have Virtual Audio cable! It's awesome, but not what I need in this situation Quote:Originally Posted by AlaskaFox other way around, if speakers are...

Quote:Originally Posted by Darren9 You'd need a mixer that supported (dual) USB, if there is one I don't think it'll be in a reasonable price range - you can't split or combine USB like you can with analogue audio. I'm guessing one...

Quote:Originally Posted by Tjj226 Angel You could try and get a cheap receiver with two optical in ports. Then all you need to do is switch between input sources. There are actually several other ways of doing that too.Thanks for...

Hello, I have Bose Companion 5 series speakers, I would like to use them on two computer at once. I.e. I would like them to output sound from both computers at the same time, could this be accomplished with some sort of USB splitter or...

Quote:Originally Posted by Locool676 From my experiences: When a system boots with out the P4/8, but does nothing with it in, the VRMs are blown. If I'm understanding correctly, you tried to boot everything up with it out of the...

Hello, I have a semi-old system (2008/9): 1 x Intel Core i7-920 Bloomfield 2.66GHz LGA 1366 130W Quad-Core Processor BX80601920 1 x EVGA E758-TR 3-Way SLI (x16/x16/x8) LGA 1366 Intel X58 ATX Intel Motherboard 1 x ASUS EAH4850...

Hello, I have the setup you see in my rig. I have been trying to play TF2 and a Half-Life Mod for a couple of days now, but whenever I am into the game for a while my computer always freezes and bsods. Is my graphics card dying, my...

Quote:Originally Posted by Sean Webster Yes it is supported. Look in my install/ optimization guide in the third post for a guide to properly secure erase your c300. Tried doing it with this guide - didn't work, seems like my laptop...

Quote:Originally Posted by Sean Webster So you did the clean all command in diskpart? That could be why, that writes a lot to the SSD. You should do a Secure Erase to reset the NAND. You should only do the clean command without the...

Quote:Originally Posted by Sean Webster Take it out and test it in the desktop, just to make sure. I didn't even see that the writes were that low lol, i only looked at the reads. If anything it may be because you just reinstalled....