Posts by billbartuska

The RAID driver is usually included in the chipset driver package. If there are no WIN7 chipset drivers then likely there are no WIN7 RAID drivers. With desktop computers the chipsets are fairly standard and drivers are available...

You could check voltages with a volt meter, or amps with an amp meter.

Automotive heater cores work better than an AC condenser.

If the RAID is going to be striped (RAID 0) and be the boot drive, you have have to install the OS after you make the RAID array. Bottom line: you'll have to do a new, clean install of the OS.

Quote:Originally Posted by Rushua also the dragonfly is kinda expensive (more than the headphones!) I had a look at the Xonar u3, many are saying the Fii0 10 is better... this is all so confusing. A sound card (internal or external)...

Audioquest Dragonfly. Just what you;re looking for. Then get JPLAY.

You're doing the 85% backwards. The PSU is only 85% efficient. So the power coming out is only 85% of the power going in. At 450 watts coming out, it will be sucking something like 530 watts out of the mains. From here Output ...

are you reading Pins 1 (Blk/Ground) and 2 (Red/12v)?

You da man!!!!

This: