Posts by Templar848

I just got a 7750 in January. Honestly, I regret it. It is a good chip, and way faster than the Athlon 64 in the computer I replaced, but mine will simply not OC past 3.2 with any stability, and that seems to be a trend. There are a...

Quote: Originally Posted by numanoid I still need some help with my system if anyone can help. I can seem to get stable at 3.10 but nothing over that. Can anyone help with bios settings? Should ACC be on or off?...

My M3A79-T has most of those options. The CPU-NB volts are the volts that most call NB. I tried running those on Auto but overclocking was severely limited. I ended up raising them to 1.4 (which is what GSkill recommends for NB...

New personal best for me with this processor. I have not tested it for stability yet. 1.5 Volts http://valid.canardpc.com/show_oc.php?id=521413

I am running 2 Sapphire 4830s in crossfire. I love it.

Quote: Originally Posted by Sonorously The CCF has a horrible mounting system, you'll spend atleast 2 hours trying to put it on your motherboard without snapping it in half. I had to bend my motherboard roughly 40...

Quote: Originally Posted by JDMB20TDA highest I was able to get it so far. 16 hours orthos stable. core contact freezer (sunbeam) motherboard just took a crap so ill be back to push it further. Is...

I have never been able to get Orthos or Prime stable at anything over 3.21 ghz, and that requires 1.45 volts to be stable in an Orthos test overnight. Any less voltage and I get a rounding errors within an hour or two. I have managed...

Hello all. I've been reading this thread for some time now and it's been very informative. I have been running one 4830 since the middle of January, and just today received my second and set up Crossfire. Here is my validation. ...

Quote: Originally Posted by ssego Here's my meager 3.28GHZ OC, using the stock sink from my old X2 4800 (the one with the heatpipes). http://valid.canardpc.com/show_oc.php?id=509247 I can't seem to get it to boot and...