Posts by TiGa

A 32-bit DLL needs to be recompiled from the source to turn it into a 64-bit DLL. There is no magical fix. The 64-bit instruction set is not the same as the 32-bit set either. Some new instructions have been added that only work in...

Quote: Originally Posted by Uberkhy I will need a res with the top right? If you get a normal top, yes. http://ncix.com/products/?sku=34145&...ia%20Co.%20Ltd. If you get a res top,...

Quote: Originally Posted by videoman5 I have heard a similar story, except the tubing led to an inground pool outside, and water was pulled from the pool also. Pee and chlorine make wonderful water additives....

Stay away from those Koolance fans, you're much better off with Panaflos. They make a lot of bearing noise and ticking noises when undervolted. IIRC They are 8W each so make sure you don't overload the channel on your controller and...

The more flow you have, the better the cooling. The GTX240 rad is just enough for a quad core, not overkill. An i7 would need a 360 rad. You want to get fittings that match your tubing size so whether they are black nickel or purple...

Koolance has G1/4-to-copper-pipes fittings so if you measure well, you could fit the rad directly on the copper pipes. I'd go with one or two MCP355 pumps. You want max head pressure, not max flow. Also don't forget that you need a...

These are two examples of pump tops: http://ncix.com/products/?sku=34148&...ia%20Co.%20Ltd. http://ncix.com/products/?sku=34145&...ia%20Co.%20Ltd. They increase the performance of the pump and allow to use any fittings that you...

Quote: Originally Posted by gsx1300rk6 yeah that isn't a bad idea really but with guests idea what about running the mobo off the 480 still and running dual 120's for the gpus with a set of 3000rpm kaze fans one rad...

Quote: Originally Posted by hks85 no amount of bubble wrap will do anything without supporting the insides being supported. be extra careful about supporting your video card. the last time i shipped my computer i had...

Quote: Originally Posted by gsx1300rk6 Honestly i don't think i will have much space constraints with the case i ordered its 210 x 595 x 588mm and link below shows the case comes with a 480 rad premounted...